Nint endo11/12/2023 ![]() If after 12-24 hours you still get nothing from trying to turn it on, try a hard reset as detailed above as one last attempt to get things going. Leave it on charge (supervised) for at least 2 hours, but keep it plugged in for longer if it still shows no signs of life. If your console only just ran out of juice and you plug it in, it will likely be useable almost immediately, but if it’s sat for weeks or even months with no charge it could take several hours to get even any kind of response out of it. If the battery’s been really heavily drained, it needs to recharge slowly for safety reasons (that’s a very basic explanation of how lithium-ion batteries work but it’s enough for the purposes of this guide). Image: Alex Olney / Nintendo Life Leave it to charge for a few hours. Replace it with another official adapter, and see if using a brand-spanking new solves your issue. If you see any signs of damage, do not use the adapter at all as it could pose a danger. Check inside the USB-C plug for any bent pins that might not be making good contact (bad), inspect the cable for fraying as this can cause a short (very bad), and as obvious as it sounds, make sure there are no cracks or buckling on the housing of the wall adapter side (genuine fire risk). Before you test it though… Image: Alex Olney / Nintendo Life Check the power adapter for damageĭoes it all look all right on both ends? The official power adapter is pretty hardy, but it’s not impervious. This will in essence reset the adapter and set things right. Unplug it from both your Switch and the wall and leave it for 30 to 60 seconds. Seems ludicrous, but there’s a surprising amount of gubbins inside that power adapter of yours. Image: Alex Olney / Nintendo Life Power-cycle your power adapter We’re sure there are plenty of perfectly sensible third-party adapters out there, but we can’t vouch for their reliability or safety, but we (and obviously Nintendo) can vouch for the official charger. The Switch charges using a non-standard protocol, so if you’ve been using a third-party solution that may be where issues arise. Use an official Nintendo Switch Power Adapter If you console isn’t taking or keeping a charge, there’s a couple of solutions you can try before taking the nuclear option. With any luck things should now function just as you’d expect them to this solution has even saved some of the NLife crew once or twice. Release the power button from your firm finger force, and press it once as you usually would to turn it on. You can do this by holding down the power button on the top of the console (not the Home Button on the Joy-Con) for around 12 seconds, or 15 if your second counting ability leaves something to be desired. If charging does nothing at all then your next bet should be to perform a hard reset. Image: Alex Olney / Nintendo Life Perform a hard reset ![]() ![]() Charge it with the official Nintendo Switch Power Adapter that came with the console and leave it for at least an hour. Usually the screen will still light up with a battery indicator letting you know it needs charging, but if it’s seriously empty it won’t have the charge to even do that. Sounds basic we know but we’re none of us immune to simply forgetting that the Switch didn’t have as much charge as we thought. If your console was otherwise behaving and then suddenly refused to turn on, there’s a few things you can try. Can I repair it myself? I have a screwdriver somewhere… ![]() On this page: How To Fix Your Nintendo Switch When It Won't Turn On Or Charge If your Switch is unresponsive and won’t turn on, or has an issue with charging, we’ve got a few solutions for you to hopefully save yourself a tremendous amount of headache. Like any electronic device, the Switch isn’t perfect in hardware or software and although issues with either are shouldn't crop up too often, they can happen.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |